Yes. Mobile cone crusher plants are specifically designed for medium-hard to high-hardness materials such as granite, basalt, quartz, and river stone. Compared with impact crushers, cone crushers offer better wear resistance and lower operating costs for abrasive rock.

Yes - remote commissioning guidance via video call is provided at no charge for all Anshun mobile plants. On-site engineer dispatch is available as an optional paid service.

It can operate standalone when fed directly by excavator or wheel loader with material already at ≤500mm feed size. For run-of-mine material or large quarry blasts with feed sizes exceeding 500mm, a primary jaw crusher upstream is required.

Output size is determined by the gap setting on the impact plates and the screen mesh sizes fitted to the vibrating screen. Typical configurations produce 0–31.5mm or 0–50mm total product, separated into 2–4 size fractions by the three-deck screen. Custom screen mesh sizes are available on request.

For limestone and concrete waste, blow bars typically last 200–500 operating hours depending on feed hardness and throughput rate. Impact plates last longer - typically 2–3 times the blow bar interval. We stock blow bars and impact plates for all PF series models for fast dispatch.

Yes, provided the feed contains no large steel reinforcement bars. Rebar longer than approximately 300mm can wrap around the rotor and cause damage. A pre-screening or manual removal step is recommended for heavily reinforced concrete demolition waste before feeding the impact crusher.

A jaw crusher is best for primary crushing of hard, abrasive rock (granite, basalt, iron ore) where durability under high compressive force is the priority. An impact crusher is best for secondary or tertiary crushing of medium-hard materials (limestone, concrete waste, dolomite) where particle shape and output gradation are the priority. For most aggregate and recycling applications, the two are used together in sequence: jaw crusher first, impact crusher second.

On granite at typical hardness (200–250 MPa), manganese steel jaw plate life is typically 200–500 operating hours depending on feed gradation and CSS setting. Finer CSS settings and irregular, angular feed accelerate wear. We supply OEM manganese jaw plates for all C-series models and recommend keeping one spare set on site.